Section 4: Using the Model 9100: Insulation/Continuity Function (Option 135) 4.18-5
4.18.3.2 Right Side Screen Keys
A. Digit Edit Facility Keys operate on the value marked by the cursor.
X
10 Multiplies the marked value by ten.
÷
10 Divides the marked value by ten.
B. Direct Edit Facility Right side keys operate on the value in the edit box, and acting
in place of the ↵ key, exit from Direct Edit back to Digit Edit;
then set the value multiplier as evaluated in the box.
i. Output Value and Offset Value
Ω Evaluates the number in the box as Ohms
kΩ Evaluates the number in the box as Kilohms
MΩ Evaluates the number in the box as Megohms
GΩ Evaluates the number in the box as Gigohms
ii. Deviation Value
% Evaluates the number in the box in Percentage Deviation. Refer to
section 4.7.3 for a further explanation with examples.
To Next Page
Loading...
