EasyManua.ls Logo

Focus IMPULSE EVO PEDELEC - Page 79

Focus IMPULSE EVO PEDELEC
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Original User Guide | Impulse Evo pedelec Version 2 US-79
NOTICE
The mains voltage must match the supply voltage of the battery
charger, otherwise there is a risk of damage to the device. The supply
voltage of the battery charger is marked on the back of the device.
Do not charge batteries for a long period if they are already fully
charged or are not being used. Electricalstorms,voltageuctuations
and short circuits can damage the battery.
Keep the battery charger clean. If the contacts are dirty, the dirt can
burn during charging, leaving burn marks. In such cases the charger
must be replaced 7.4.3 Cleaning, Page US-77.
8.2 Technical Data
Charger Type 1
Battery voltage
36 V
AC input voltage
110 – 240 V
Frequency
50 - 60 Hz
Maximum DC output voltage
42 V
Maximum charging current
4 A
Dimensions ( L | W | H)
6.83 inches | 3.2 inches | 1.83 inches
Permitted ambient tempera-
ture range during charging
32 to 104 °F
Storage temperature
14 to 122 °F
Recommended storage
temperature
65 to 73 °F
Weight
1.59 lbs
Protection class
The charger is only intended for interior
use. Do not expose the battery charger to
rain and moisture. If water gets into the
charger there is a risk of electric shock.
Charging cable

Table of Contents