Focus IMPULSE EVO PEDELEC - Page 92

US-92 Original User Guide | Impulse Evo pedelec Version 2
Description Cause Remedy
Some of the display is missing The display is faulty. Enable the test display  6.4.2.20 Version, Page US-65. The display may have to be replaced. Please ask your
dealer.
Display lighting not working The display is faulty. Please ask your dealer. The display may have to be replaced.
There is mist in the display Moisture has got in. Dry out the pedelec complete with display at room temperature (66 to 69 °F). If the display still has some mist
in it, contact your dealer. The display may have to be replaced.
The smartphone does not connect with the
Impulse Evo Smart display
a) Your smartphone is not
equipped to connect with the
Impulse Evo Smart display.
a)Checkthetechnicalspecicationofyoursmartphone 9.1 Technical requirements, Page US-82
.
b) The pedelec software is not
up to date.
b) Contact your dealer for a software update.
c) The distance between the
smartphone and display is too
great.
c) Reduce the distance between the smartphone and display to a maximum of 9,84 feet.
d) The Bluetooth module on the
display is faulty.
d) Please ask your dealer.
e) The Impulse E-bike
Navigation app is out of date.
e) Download the latest version of the Impulse E-bike Navigation app  9.3 Installation, Page US-84
.
f) The smartphone has
"crashed".
f)Switchothesmartphone(ifnecessarytakeoutthesmartphonebatteryandreplaceitagain)andrestart.
g) The Bluetooth function of
your smartphone is not
enabled.
g) Enable the Bluetooth function on your smartphone.
Motor assist level is too weak a) Climb Assist is set too low.
a) Change the value  6.4.2.15 Climb assist, Page US-64
.
b) Empty battery b) Insert new/charged battery 8.3.1 Charging the battery, Page US-80
b)Rideproleissettoolow
b)Changetherideprole 6.4.2.16 Ride profile, Page US-64
.
Motor idles a) Gear changing is not properly
set
a) Check the setting. If necessary, ask your dealer.
b)Chain/belthascomeo b) Lift the chain/belt on to the sprocket and adjust the tension. If necessary, ask your dealer  3.7.1 Chain
tension, Page US-29  3.8.1 Belt tension, Page US-31
.