Ford C-MAX Owner's Handbook

Set the hours with the rotary control.
Press SET/RESET and the minutes
will flash.
Set the minutes with the rotary
control.
Press SET/RESET and the second
programme time will flash. Repeat to
set the second programme time.
Note: If only one programme time
is desired, select dashes when
scrolling through the hours and
minutes. These appear between 23
and 00 hours and between 59 and
00 minutes.
After setting the minutes of the
second programme time, press
SET/RESET and the cursor will flash.
Press SET/RESET again and the
cursor will change to a tick. The tick
confirms that the time schedules are
now stored and that the heater will
have the vehicle warmed up at the
times set.
Note: It is not possible to select the
Seven days in the week, Five
days in the week and Single
day within week functions
simultaneously as only one set of
times can be programmed for each
day.
If programme times for one of these
functions are stored and active,
confirmed by a tick, a lock symbol will
appear in the programming display
of the other two, showing that these
functions cannot be activated. To
activate one of the other two
functions, first deactivate the function
currently active by deleting the tick.
To deactivate the function, scroll to
the relevant display and press
SET/RESET repeatedly until the tick
flashes. Press SET/RESET again to
delete the tick and deactivate the
function.
Programming procedure for
Any time and date
In the Auxiliary heater
programming menu, scroll to this
display using the rotary control and
press the SET/RESET button.
The hours will flash.
Set the hours with the rotary control.
Press SET/RESET and the minutes
will flash.
Proceed in the same way to set the
minutes, the month and the day.
After setting the day, press
SET/RESET and the cursor will flash.
Press SET/RESET to confirm the
settings. The cursor will change to a
tick. The tick confirms that the time
schedule is now stored and the
heater will have the vehicle warmed
up at the time set.
To deactivate the function, scroll to
this display and press SET/RESET
repeatedly until the tick flashes. Press
SET/RESET again to delete the tick
and deactivate the function.
Chime deactivation
The following chimes can be
deactivated:
•
Low fuel warning.
•
General warning messages.
102
Information displays

Ford C-MAX Specifications

General

Brand	Ford
Model	C-MAX
Category	Automobile
Language	English