To return the seats to the forward
position, pull the lever and slide the
seats forwards. After releasing the
lever, rock the seats to ensure that
the catch is securely engaged.
To return the centre seat to its
original position, pull the lever on the
underside of the seat. Fold the centre
seat forwards and push it back down
fully until it engages.
Fold the front of the luggage cover
forwards.
WARNING
Do not slide the outboard seats
rearwards into the comfort
position if the centre seat is folded
forwards. There is a risk of injury in
the event of an accident or if the
centre seat falls back down.
Folding the seatbacks
forward
WARNING
Do not fold the seatbacks
forward when the seats are in
the comfort position (slid rearwards).
This could result in damage to the
seats or panel trim. Slide the seats
fully forwards.
All three seatbacks can be folded
forward independently of one
another.
Remove the seat belts from the belt
guides on the outboard seatbacks.
The seat belt tongues must be
inserted into the retaining slots. The
retaining slot for the centre seat belt
is located in the roof. See
Fastening the seat belts (page
31).
Lower the outboard head restraints
and raise the centre head restraint.
125
Seats
To Next Page
Loading...
Need help?
General
