Dialling a number - Bluetooth
phone
Using the Bluetooth phone, phone
numbers can be dialled using voice
control, refer to the Voice control
chapter.
Ending a call
Calls can be ended by either:
•
pressing the reject button
•
pressing the MODE button on the
remote switch
•
pressing the off button on the
navigation system
•
pressing the right rotary entry
control button.
Redialling a number - cradle
phone
1. Press the PHONE button on the
audio unit.
2. Press the MENU button.
3.
Select the CALL OUT list, CALL
IN list or REDIAL.
4. Press the PHONE button on the
audio unit to dial the desired
phone number.
Redialling a number -
Bluetooth phone
1. Press the PHONE button on the
audio unit.
2. Press the MENU button.
3.
Select REDIAL.
4. Press the PHONE button on the
audio unit to dial the phone
number.
Handling an incoming call
Accepting an incoming call
Incoming calls can be accepted by
either:
•
pressing the accept button
•
pressing the MODE button on the
remote control
•
pressing the PHONE button on
the audio unit
•
using the ACCEPT option in the
menu.
Rejecting an incoming call
Incoming calls can be rejected by
either:
•
pressing the reject button
•
pressing one of the following
buttons on the audio unit: CD,
AM/FM
•
using the REJECT option in the
menu.
Note:
You cannot reject an incoming
call using the remote control MODE
button.
Handling a second
incoming call
Note:
The second incoming call
function must be activated in your
phone.
If there is an incoming call, whilst
there is an ongoing call, a beep will
be heard and you will have the option
to end the active call and to accept
the incoming call.
239
Telephone
To Next Page
Loading...
Need help?
General
