Failure to start
The passive starting system will not
function if:
•
The passive key frequencies are
jammed.
•
The passive key battery is flat.
If you are unable to start your vehicle
carry out the following procedure.
Type 1
1. Hold the key next to the steering
column shroud exactly as shown.
2. With the key in this position you
can use the start button to switch
the ignition on and start your
vehicle.
Type 2
1. Carefully prise out the cover.
2. Insert the key into the key holder.
3. With the key in this position you
can use the start button to switch
the ignition on and start your
vehicle.
147
Starting the engine
To Next Page
Loading...
