1. Insert the tow ball arm vertically
and press it upwards until it
engages. Do not hold your hand
near the handwheel.
2. To lock: Turn the key clockwise
and remove the key.
Insert the end of the protection cap
into the keyhole.
Driving with a trailer
WARNING
If any of the below conditions
cannot be met, do not use the
tow bar and have it inspected by an
expert.
Before starting your journey, ensure
the tow ball arm is properly locked.
Check that:
•
The green mark on the
handwheel is next to the white dot
on the tow ball arm.
•
The handwheel A is pushed in
against the tow ball arm.
•
The key B has been removed.
•
Secure positioning of the towball
arm. (Must remain perfectly in
place when jerked.)
Removing the tow ball arm
1. Remove the protection cap
covering the keyhole. Insert the
key and turn it anticlockwise to
unlock.
2. Hold the towball arm. Pull out the
handwheel and turn it clockwise
until it clicks and pull the towball
arm downwards.
3. Remove the tow ball arm.
Release the handwheel.
When unlocked in this way, the tow
ball arm can be reinserted at any
time.
171
Towing
To Next Page
Loading...
Need help?
General
