CHANGING A BULB
WARNINGS
On vehicles fitted with Xenon
headlamps, have the headlamp
bulbs changed by an expert. There
is a risk of injury due to high voltage.
During operation, the bulbs and
their surroundings get hot.
Switch off the lights and let the bulbs
cool down before replacing them.
Always switch off lights and ignition
before replacing any bulb.
Never touch the glass of the bulbs.
Fit only bulbs having a UV filter.
Always replace a faulty bulb with a
new one of the same type. After
replacing a bulb, check that the lights
operate correctly.
Headlamps, side lamps,
direction indicators
Note:
It is necessary to remove the
headlamp assembly to remove any
of the bulbs.
Removing the headlamp
assembly
Open the bonnet.
WARNING
When re-installing the lamp
assembly, make sure that the
wiring connectors and retaining clips
are engaged properly.
Press down the retaining clips at the
rear of the lamp assembly using a
screwdriver and carefully pull out the
lamp assembly.
74
Lighting
To Next Page
Loading...
Need help?
General
