•
Carefully separate the transmitter
unit from the key using a
screwdriver at the recess on the
back.
•
Open the transmitter unit by
separating the retaining clips on
the sides with the screwdriver.
Replacing the battery
Type 1A
Type 2B
Passive keyC
•
Insert the screw driver into the
opening marked with an arrow
and carefully prise out the battery.
Take care not to touch the battery
contacts or the printed circuit
board.
•
Insert a new battery. The plus
contact of the battery (marked
with a +) must face upwards.
38
Keys and remote controls
To Next Page
Loading...
