Vehicles with seat supports
Slide the supports into the larger hole
on the base of the seats and detach
them. Fold the outboard seat
supports down and attach them to
the retainers on the floor. Detach the
centre seat support from the floor
and secure it in its retainer on the
floor under the right-hand seat.
All vehicles
WARNING
Make sure the seat is securely
locked by pushing forward and
rearward on the top of the seatback
or by trying to pull up the edge of the
cushion.
Fold the seats back down until they
engage.
Raise the seatbacks ensuring that
they engage in their latches.
Make sure the seatbelts will function
properly and are positioned in front
of the seatback.
The rear seatbelts should be placed
in the belt guides on the outboard
seatbacks.
Removing the seats
To increase the space in the luggage
compartment, the rear seats can be
removed completely.
Fold the seats forward. See Folding
the seats forward.
Fold up the seat to be removed to
an angle of approximately 45
degrees to the floor.
With the seat in this position, push
down both levers marked in red to
rotate the locking claws to the open
position.
To Next Page
Loading...
Need help?
General
