•
Insert the flat end of the wheel
brace between the rim and the
hub cover and twist carefully to
remove the cover.
Vehicles with locking wheel
nuts
Note:
Replacement locks and wheel
nuts can be obtained using the wheel
nut reference number certificate.
•
Insert the nut key onto the locking
nut.
All vehicles
1. Slacken the wheel nuts.
2. Place the jack with the whole foot
area on firm ground.
3. Jack up the vehicle until the wheel
is clear of the ground.
4. Unscrew and remove the wheel
nuts and take off the wheel.
Fitting a wheel
All vehicles
Note:
Make sure that you use the
correct wheel nut for the type of
wheel, if in doubt check with your
dealer.
1. Push the wheel onto the wheel
studs.
2. Screw on the wheel nuts and
secure in a clockwise direction
ensuring that the tapered end of
the wheel nuts is facing the wheel.
3. Lower the vehicle and remove the
jack.
Vehicles with locking wheel
nuts
•
Insert the nut key onto the locking
nut.
216
Wheels and tyres
To Next Page
Loading...
Need help?
General
