This is located behind the glove
compartment in the instrument panel.
To gain access to the fuse box:
•
Remove the screws in the
instrument panel trim underneath
the glove compartment and let
the trim panel drop down.
•
Loosen the quick fix screws on
the fuse box.
•
Let the fuse box down and pull it
towards you.
•
Hang the fuse box in the front
fixture of the bracket.
Reinstall in the reverse order.
CHANGING A FUSE
WARNINGS
Do not modify the electrical
system of your vehicle in any
way. Have repairs to the electrical
system and the replacement of
relays and high current fuses carried
out by properly trained technicians.
WARNINGS
Switch the ignition and all
electrical equipment off before
touching or attempting to change a
fuse.
CAUTION
Fit a replacement fuse with the
same rating as the one you have
removed.
Note:
You can identify a blown fuse
by a break in the filament.
Note:
All fuses, except high current
fuses are a push fit.
Note:
A fuse puller is located in the
lid of the auxiliary fuse box.
FUSE LABELS
The fuse chart label shows
rectangles representing a fuse or
relay. The following information is
shown in the rectangles:
177
Fuses
To Next Page
Loading...
Need help?
General
