Insert the spare key blade into the
container until it clicks. Make sure the
blade is inserted the right way up.
To release the spare key blade from
the container, press the upper part
of the button.
Insert the spare key blade back into
the passive key until it clicks.
Insert the container back into the
ignition switch.
Disabled passive keys
Note:
All your passive keys will be
enabled, regardless of whether they
are located inside the vehicle or not.
If one or more passive keys are left
inside the vehicle interior when it is
locked, the passive keys inside the
vehicle will be disabled. In order to
use these passive keys again, they
have to be enabled.
To enable all your passive keys:
Using an enabled passive key,
depress the clutch pedal (manual
transmission) or brake pedal
(automatic transmission), push the
ignition switch in and turn it to position
II.
46
Locks