Foscam CGI - Page 11

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
11
2.The example and description of
command-setMotionDetectConfig,
setScheduleSnapConfig, setIOAlarmConfig
1.0.8
Houzhen
2014-1-17
1.Add commmad:
getRecordList2,reloadRecordindex
1.0.9
Houzhen
2014-3-15
1.Add command:
getRatio, setRatio
2.Modify command:
1) The example of command:
setCruisePrePointLingerTime,
getCruisePrePointLingerTime.
2) The return discription of command:
getProductWpsFlag.
3）The Param of command:smtpTest.
1.0.10
Houzhen
2014-4-2
1.Add commmad:getPPPoEConfig,
setPPPoEConfig,getRecordPath,getScheduleRe
cordConfig,getP2PInfo;
2.Modify the priviage of command for security:
changePassword,changeUserName,changeUser
NameAndPwdTogether,getSessionList,getUser
List,getImageSetting,getMirrorAndFlipSetting,
getMotionDetectConfig,getScheduleSnapConfi
g,getVideoStreamParam,getSubVideoStreamPa
ram,getMainVideoStreamType,getSubVideoStr
eamType,getH264FrmRefMode,getSnapConfig
,getOsdMaskArea,getOSDSetting,getOSDMas
k,getPTZSpeed,get485Info,getPTZPresetPoint
List,ptzGetCruiseMapList,ptzGetCruiseMapInf
o,getPTZSelfTestMode,getPTZPrePointForSelf
Test,getCruiseTime,getCruiseTimeCustomed,g
etCruiseLoopCnt,getCruiseCtrlMode,getCruise
PrePointLingerTime,getZoomSpeed,getSMTP
Config,getIPInfo,getPortInfo,getUPnPConfig,g
etDevInfo,getDevName,getFirewallConfig,getS
ystemTime,getFtpConfig,testFtpServer,getDD
NSConfig,getLog,getRecordList,getRecordList
2,reloadRecordindex,getScheduleRecordStrea
mChn,getAlarmRecordConfig,getLocalAlarmR