Foscam CGI - Page 28

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
28
triggerInterval
The time of which motion detect alaram can
trigger again when a motion detection has
happened.P.s.The true value of triggerInterval
time is the value of the cgi set add 5s.
isMovAlarmEnable
0
Disable
1
Enable
isPirAlarmEnable
0
Disable
1
Enable
scheduleN
The motion alaram schedule of one week,
N = 0(Monday) ~6(Sunday)
For detail, see *1 bellow
areaN
The area info of row N
For detail, see *2 bellow
Return
None
Note
·Video region is divided into 10*10 sub areasideo region is divided into 10*10
sub areas
·The min unit of schedule is half an hour, scheduleN value range
1-2
N
(N[0-48])
.areaN value
1-2
N
(N[0-10])
Example
/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=1&linkage=16&s
napInterval=2&sensitivity=1&triggerInterval=5&isMovAlarmEnable=1&isPirAla
rmEnable=1&schedule0=1023&schedule1=1023&schedule2=1023&schedule3
=1023&schedule4=1023&schedule5=1023&schedule6=1023&area0=1023&are
a1=1023&area2=1023&area3=1023&area4=1023&area5=1023&area6=1023&
area7=1023&area7=1023&area8=1023&area9=1023&usr=admin&pwd=
*1 schedule bitmap
0
1
2
3
4
5
6
7
Monday
Tuesday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
…
Wednesday