Need help?Do you have a question about the fSONA Sonabeam E Series and is the answer not in the manual?
General| Brand | fSONA |
|---|---|
| Model | Sonabeam E Series |
| Category | Touch terminals |
| Language | English |
Explains the manual's structure and content sections.
Details special formats for notes, warnings, and important information.
Emphasizes mandatory safety practices for installation.
Explains the various labels and symbols on the SONAbeam terminal.
Details criteria for selecting optimal terminal locations.
Discusses safety considerations for installation locations.
Presents various mounting solutions for terminals.
Details power input specifications and requirements.
Lists available fiber optic transceivers for network traffic.
Describes the components included in the terminal package.
Lists available optional accessories for installation.
Provides instructions for safely unpacking the optical head.
Stresses safety precautions during installation.
Details tools needed for installation.
Step-by-step guide for pole mount installation.
Guides on mounting the optical head to the prepared mount.
Explains how to make customer interface connections.
Provides instructions for connecting power to the terminal.
Covers the installation of network cables and SFP transceivers.
Details serial, USB, and Ethernet management ports.
Explains the purpose of the STC software.
Details how to connect a PC for setup.
Covers powering on the terminal using the circuit protector.
Guides on checking terminal status via LEDs.
Outlines initial terminal setup steps.
Guides through the terminal's initial configuration process.
How to check terminal operating parameters.
Lists tools and personnel needed for alignment.
Covers controls for azimuth and elevation tuning.
Initial step to align terminals visually.
Process for acquiring the optical signal.
Provides tables for gauging optimal alignment.
Steps to secure the tuned alignment.
Instructions for bringing the link online and monitoring.
To Next Page