About This Manual
wireless at the speed of light …………….
1
-Series Installation Manual
About This Manual
This manual is designed for system integrators and installers of fSONA’s SONAbeam
optical communications terminal to help plan, install and commission robust, very high
speed wireless optical communications links.
How this Manual is Organized
This manual covers a wide scope of material from initial planning and site surveying,
through installing and commissioning high speed, wireless optical communications links.
In order to better present such information, this manual is divided into seven major
sections to individually address each stage:
About Your SONAbeam Terminal
This section provides an overview of the SONAbeam communications link
and presents a general picture of the overall system installation and its
interfaces…
Preparing Your Installation Site
This section provides valuable information to better prepare for your
installation. With the information presented here, you can reduce (if not
eliminate) a number of problems and help ensure a successful installation…
Unpacking Your SONAbeam Terminals
This section describes what will be received from fSONA and identifies
what you will need to provide in order to complete the installation…
Installing Your SONAbeam Terminals
This section provides a step-by-step procedure describing the physical
installation of SONAbeam terminals and their interfacing connections. A
pre-power up check list is also presented…
Initial Power Up and Configuration
This section describes the initial power up sequence and how to configure
your SONAbeam for your network operations…
Aligning Your SONAbeam Terminals
This section describes how to precisely align a pair of SONAbeam
terminals for optimal performance…
Deploying your SONAbeam Link
This section describes the final steps of deploying your SONAbeam link…
To Next Page
Loading...