Unpacking Your SONAbeam Terminal
wireless at the speed of light …………….
25
-Series Installation Manual
Optional Accessories
The following optional accessories are available from fSONA to help with the success of your
FSO installation:
(OPTIONAL) Terminal Mounts
The Pole/Wall Mount and the Pedestal Mount both provide a ready-made platform on which to
mount and align your SONAbeam terminals.
(OPTIONAL) Basic Alignment Kit
The Basic Alignment Kit – fSONA Part No. 80-0047A – provides the accessories needed to
perform the alignment of a newly installed SONAbeam terminal. Typically, you will require
two kits to perform your link alignment, one kit for each terminal.
1 – 3m CAT 5 communication cable w/ RJ45
ends
1 – 3m USB cable Type A/B
1 – DB9 – RJ45 cable adapter
1 – 5mm Allen wrench
1 – 9X Alignment scope w/ mount
(NOTE: The Alignment Scope includes a
special spectral filter that allow you to safely
‘look at’ the opposing terminal’s laser beam.)
fSONA PN: 80-0031A
To Next Page
Loading...