Unpacking Your SONAbeam Terminal
24
wireless at the speed of light …………….
NAbeam E-Series Installation Manual
SONAbeam E-Series Installation Kit
The E-Series Installation Kit includes the following items:
Mounting hardware:
1 – Azimuth locking plate
10 – Cable ties (5 short & 5 long)
1 – ½” flat washer
1 – ½” lock washers
1 – ½” hex nut
1 – Cable strain relief
Documentation:
1 – SONAbeam E-Series Installation
QUICKSHEET
1 – SONAbeam Utilities Software CD
WARNING!
If any of these items are missing or damaged, immediately notify your fSONA
representative!
Confirm a complete inventory before commencing your installation!
To Next Page
Loading...