Unpacking Your SONAbeam Terminal
26
wireless at the speed of light …………….
NAbeam E-Series Installation Manual
(OPTIONAL) Customer Interface Kit
The Customer Interface Kit – fSONA Part No. 80-0168A – provides the material required to
interface your terminal’s power and communications to your (suitably located, installer
provided) Customer Interface Box:
1 – 2.25m 1” Liquid-Tight flexible conduit
1 – 1” Liquid-Tight conduit connector kit
1 – 3m 3-18 AWG power cable
1 – 3m Single-mode DUPLEX fiber optic cable
w/ LC ends
1 – 3m Multi-mode DUPLEX fiber optic cable
w/ LC ends
2 – 3m CAT 5 communication cables w/ RJ45
ends (serial & LAN)
To Next Page
Loading...