26
Derivative time (Setting range: 0.0 to 999.9 seconds)
[Description]
• can be set automatically by the auto-tuning operation.
•
can also be set manually.
[Setting example] Changing the differential time from 60.0 seconds to 50.0 seconds
•When
is set to 0, the differential operation does not start.
•When
is set to 0.0, this makes the setting of
ineffective.
Press and hold the
SEL
key for three seconds.
will be displayed on the PV display.
Press the key to display .
Press the
SEL
key once.
The current setting ( ) flashes on the SV display.
Press the or keys to display .
Press the
SEL
key once. will stop flashing and will be registered for . After that, the
controller will operate with being 50.0 seconds.
If you want to display the operation status, press and hold the
SEL
key for two seconds.
Operating procedureDisplay
1.
2.
3.
4.
5.
6.
To Next Page
Loading...
