Fuji Electric Micro-controller X Series User Manual

71
[Description]
• This parameter sets the parity for communications.
The baud rate is fixed at 9600bps.
: Odd parity
: Even parity
: No parity
Parity for communication (Setting range: 0 to 2)
[Setting example] Setting the even parity
Press and hold the
SEL
key for five seconds.
will be displayed on the PV display.
Press the key to display .
Press the
SEL
key once.
The current setting ( ) flashes on the SV display.
Press the or keys to display .
Press the
SEL
key once. will stop flashing and will be registered for . However, it does
not switch to the even parity at this point.
Power off the PXR, and then on. The even parity is set now.
Operating procedureDisplay
1.
2.
3.
4.
5.
6.

Fuji Electric Micro-controller X Series Specifications

General

Brand	Fuji Electric
Model	Micro-controller X Series
Category	Microcontrollers
Language	English