Fuji Electric Micro-controller X Series User Manual

69
[Setting example] Changing the SV (Front SV) to SV1
If you want to display the operation status, press and hold the key for two seconds. The SV
value and SV No. will appear alternately.
The switched SV or will be displayed alternately on the display area.
Press the key once. will be displayed and 1 will be registered for .
Press and hold the key for five seconds.
will be displayed.
Press the or keys to flicker and to display .
(Repeat the procedure from 3 to 5 to check the set value.)
Press the key once.
The current setting ( ) will be displayed.
Press the key to display .
1.
4.
If unoperated state continues, the PV will be displayed.
7.
Short-circuit the Di1 terminals. The SV will be changed from the front SV to SV1.
6.
2.
3.
5.
Display Operating procedure
PV indication
PV indication
SV indication
SEL
SEL
SEL
SEL

Fuji Electric Micro-controller X Series Specifications

General

Brand	Fuji Electric
Model	Micro-controller X Series
Category	Microcontrollers
Language	English