Fuji Electric Monitouch V9 Series - Page 198

9.1 PLC Connection 9-5
*1 For KeepAlive functions, see “1.3.2 Ethernet Communication”.
*2 For the ladder transfer function, see the V9 Series Reference Manual.
FX Series
*1 FX2NC-CNV-IF or FX3UC-1PS-5V (Mitsubishi Electric) is required.
*2 For KeepAlive functions, see “1.3.2 Ethernet Communication”.
*3 For the ladder transfer function, see the V9 Series Reference Manual.
QnH (Q) series
(multi CPU) (Ethernet)
Q02, Q02H
Q06H
Q12H
Q25H
QJ71E71 QJ71E71-B2
QJ71E71-100
Auto-open: 5000
Open setting:
As desired
(max. 16 units)
Q02U
Q03UD
Q04UDH, Q06UDH
Q10UDH, Q13UDH
Q20UDH, Q26UDH
QJ71E71-B2
QJ71E71-100
Q03UDE
Q04UDEH, Q06UDEH
Q10UDEH, Q13UDEH
Q20UDEH, Q26UDEH
Q50UDEH, Q100UDEH
Open setting
(max. 16 units)
QnH (Q) series
(multi CPU) (Ethernet)
Q02, Q02H
Q06H
Q12H
Q25H
QJ71E71 QJ71E71-B2
QJ71E71-100
Open setting:
As desired
(max. 16 units)
Q02U
Q03UD
Q04UDH, Q06UDH
Q10UDH, Q13UDH
Q20UDH, Q26UDH
QJ71E71-B2
QJ71E71-100
Q03UDE
Q04UDEH, Q06UDEH
Q10UDEH, Q13UDEH
Q20UDEH, Q26UDEH
Q50UDEH, Q100UDEH
QnU series
(Built-in Ethernet)
Q03UDE
Q04UDEH, Q06UDEH
Q10UDEH, Q13UDEH
Q20UDEH, Q26UDEH
Q50UDEH, Q100UDEH
CPU with built-in
Ethernet
Open setting:
As desired
(max. 16 units)
Q170 series
(multi CPU) (Ethernet)
Q170M
Q172DCPU-S1
Q173DCPU-S1
CPU with built-in
Ethernet
Open setting:
As desired
(max. 16 units)
L series
(Built-in Ethernet)
L02CPU
L26CPU-BT
CPU with built-in
Ethernet
Open setting:
As desired
(max. 16 units)
PLC Selection on the
Editor
CPU Unit TCP/IP UDP/IP Port No.
Keep
Alive
*1
Ladder
Transfer
*1
PLC Selection on the
Editor
CPU Unit TCP/IP UDP/IP Port No.
Keep
Alive
*2
Ladder
Transfer
*3
FX3U series
(Ethernet)
FX3U
(Version V2.21 or greater)
FX3U-ENET-L
Open setting:
As desired
(max. 2 units)
FX3U-ENET
Open setting:
As desired
(max. 4 units)
FX3UC
*1
(Version V2.21 or greater)
FX3U-ENET-L
Open setting:
As desired
(max. 2 units)