Fuji Electric Monitouch V9 Series - Page 332

13.2 Temperature Controller/Servo/Inverter Connection 13-45
13.2.10E5ZE
Communication Setting
Editor
Communication setting
(Underlined setting: default)
Temperature Controller
Unit No.
(Underlined setting: default)
Function
(Underlined setting: default)
Specification setting (RS-422/485)
The following settings are fixed; data length: 7, stop bit: 2, and parity: even.
Item Setting Remarks
Connection Mode
1:1 / 1:n
/ Multi-link2 / Multi-link2 (Ethernet) /
1:n Multi-link2 (Ethernet)
Signal Level RS-232C / RS-422/485
Baud Rate 4800 / 9600 / 19200 bps
Data Length 7 bits
Stop Bit 2 bits
Parity Even
Targe t Port No. 0
to 15
UNIT Setting Items Setting
Unit No. 0
to F (= 0 to 15)
FUNCTION Setting Items Setting
SW1
SW2
Baud rate
FUNCTION Setting Items Setting
SW1
SW2
Interface
SW3
SW4
Terminating resistance
4
3
2
1
0
F
E
D
C
B
A
9
8
7
6
5
1 2 3 4 5 6 7 8
ON
4800 9600 19200
SW1 OFF ON OFF
SW2 ON OFF OFF
1234
ON
RS-422 RS-485
SW1 OFF ON
SW2 OFF ON
Provided
(RS-422)
Provided
(RS-485)
None
SW3 ON ON OFF
SW4 ON OFF OFF