Fuji Electric Monitouch V9 Series - Page 79

2.1 Temperature Controller/Servo/Inverter Connection 2-3
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
*1 For 20E (integer variable) XXYYYY
*2 For 210 (string) XXYYYY
208 (Effective Point Data Count)
212 (Axis Status)
213 (Program Status)
Device Memory TYPE Remarks
20B (input port) 00H Read only, virtual input port not available
20C (output port) 01H Virtual output port not available
20D (flag) 02H
20E
(integer variable)
*1
03H Double-word
210
(string)
*2
04H
208 (effective point data count) 05H Read only
212 (axis status) 06H Double-word, read only
213 (program status) 07H Read only
215 (system status) 08H Read only
253 (program) 09H Write only
2A1 (scalar axis status) 0AH Double-word, read only
Variable number 0000 to 4095
Program number 00 to 99
Column number 0000 to 4095
Program number 00 to 99
Address Name
0 Effective point data count
Address Name
0 Axis 1 axis status
1 Axis 1 axis sensor input status
2 Axis 1 axis-related error code
3Axis 1 encoder status
4 Axis 1 current position
10 Axis 2 axis status
11 Axis 2 axis sensor input status
12 Axis 2 axis-related error code
13 Axis 2 encoder status
14 Axis 2 current position
20 Axis 3 axis status
21 Axis 3 axis sensor input status
22 Axis 3 axis-related error code
23 Axis 3 encoder status
24 Axis 3 current position
30 Axis 4 axis status
31 Axis 4 axis sensor input status
32 Axis 4 axis-related error code
33 Axis 4 encoder status
34 Axis 4 current position
Address Name
0Status
1 Running program step number
2 Program-sensitive error code
3 Error occurrence step