2-59
Section 2 Programming Languages
(4) Simultaneous sequences-divergence
Control is transferred to two or more steps from one step at the same time. A maximum of 32 branches are allowed.
Control is transferred to “S007” and “S008”
simultaneously when “S009” is active and
“T004” is set to “1.”
(5) Simultaneous sequences-convergence
Two or more control ows which are implemented by the simultaneous sequences-divergence converge into one.
Control transfers to “S018” when both “S016”
and “S017” are active and “T005” is set to
“1.” No transition occurs when either “S016” or
“S017” is inactive.
Active
Active
Active
Active
Active
Active
Inactive
Inactive
Inactive
Inactive
Inactive
InactiveInactive
To Next Page
Loading...
