Fuji Electric SPH Series - Memories Related to General Purpose Communication %MW1.61793 to %MW1.61838

1-31
Section 1 Specications
(7) Memories related to general purpose communication %MW1.61793 to %MW1.61838
These are special relays/registers for the general purpose communication function of the communication unit/board.
Address Name Description Attribute
%MX1.61793.0
Control signal status (PORT 1)
Displays the RTS status of PORT 1.
R
%MX1.61793.1 Displays the CTS status of PORT 1.
%MX1.61793.2 Xon/Xoff status (PORT 1)
Displays the reception status of Xon/Xoff of PORT 1.
This ag is set ON when Xoff is received and OFF when Xon is
received.
%MX1.61793.3
|
%MX1.61793.15
Not used
%MX1.61794.0
Control signal status (PORT 2)
Displays the RTS status of PORT 2.
R
%MX1.61794.1 Displays the CTS status of PORT 2.
%MX1.61794.2 Xon/Xoff status (PORT 2)
Displays the reception status of Xon/Xoff of PORT 2.
This ag is set ON when Xoff is received and OFF when Xon is
received.
%MX1.61794.3
|
%MX1.61795.1
Not used
%MX1.61795.2 Xon/Xoff status (PORT 3)
Displays the reception status of Xon/Xoff of PORT 3.
This ag is set ON when Xoff is received and OFF when Xon is
received.
R
%MX1.61795.3
|
%MX1.61796.1
Not used
%MX1.61796.2 Xon/Xoff status (PORT 4)
Displays the reception status of Xon/Xoff of the PORT 4.
This ag is set ON when Xoff is received and OFF when Xon is
received.
R
%MX1.61796.3
|
%MX1.61796.15
Not used
Address Name Description
%MW1.61798 Mode status (PORT 1)
Displays the setting status of the communication mode.
0000H: Loader communication
0011H: General-purpose communication
0020H: CPU link communication (SPF mode)
R
%MW1.61799 Mode status (PORT 2)
%MW1.61800 Mode status (PORT 3)
%MW1.61801 Mode status (PORT 4)
%MW1.61802
|
%MW1.61810
Not used