Fuji Electric SPH Series - Memories Related to Pulse;Positioning %MW1.61600 to %MW1.61769, %MW3.61600 to %MW3.61613

1-27
Section 1 Specications
(6) Memories related to pulse/positioning %MW1.61600 to %MW1.61769, %MW3.61600 to %MW3.61613
These are special relays/registers for pulse output and positioning functions built in the main unit.
1) Pulse control ag %MW1.31600 to %MW1.61601
Address Name Description Attribute
%MX1.61600.0 Pulse output start timing
Sets the pulse output start timing.
OFF: At the execution of the pulse output instruction.
ON: At the end of the scan
R/W
%MX1.61600.1
|
%MX1.61600.15
Not used
%MX1.61601.0 Pulse output status display CH0
Displays the status of the pulse output CH0.
ON: Ready for pulse output, OFF: Pulse outputting
R
%MX1.61601.1 Pulse output status display CH1
Displays the status of the pulse output CH1.
ON: Ready for pulse output, OFF: Pulse outputting
%MX1.61601.2 Pulse output status display CH2
Displays the status of the pulse output CH2.
ON: Ready for pulse output, OFF: Pulse outputting
%MX1.61601.3 Pulse output status display CH3
Displays the status of the pulse output CH3.
ON: Ready for pulse output, OFF: Pulse outputting
%MX1.61601.4
|
%MX1.61601.15
Not used