Fuji Electric SPH Series - Resource Running Information %MW10.49 (Read Only); Resource Configuration;Fault Information %MW10.50, %MW10.51 (Read Only)

1-19
Section 1 Specications
Address Name Description
%MX10.49.0 Main unit running ON while the main unit is running.
%MX10.49.1
|
%MX10.49.15
Not used
Address Name Description
%MX10.50.0 Main unit conguration ON while the main unit is running normally or in a nonfatal fault condition.
%MX10.50.1
|
%MX10.50.15
Not used
%MX10.51.0 Main unit error
ON while the main unit is stopped due to a fatal fault or running in a nonfatal
fault condition.
%MX10.51.1
|
%MX10.51.15
Not used
Resource conguration
information
Resource fault
information
Resource status
OFF OFF Nonexistent
ON OFF Normal (running or stopped)
ON ON Nonfatal fault (running or stopped)
OFF ON Fatal fault
(14) Resource running information %MW10.49 (Read only)
(15) Resource conguration/fault information %MW10.50, %MW10.51 (Read only)
The resource conguration/fault information enables an application program to recognize the status of the main unit.