Fuji Electric SPH Series - System Definition Error Factor %MW10.22 to %MW10.27 (Read Only)

1-16
Section 1 Specications
Address Name Description Level
%MX10.22.0 Not used
%MX10.22.1 System denition error
ON when the contents of the system denition in the main unit do
not match the actual system conguration.
Fatal fault
%MX10.22.2
|
%MX10.22.9
Not used
%MX10.22.10 CPU running denition error ON when the system denition contains an error. Fatal fault
%MX10.22.11
CPU memory boundary
denition error
ON when the memory space used by an application program
exceeds the total memory capacity.
Fatal fault
%MX10.22.12
%MX10.22.13
Not used
%MX10.22.14 CPU running denition 3 error ON when the running denition of SPF contains an error. Fatal fault
%MX10.22.15 CPU running denition 2 error ON when the running denition of SPF contains an error. Fatal fault
%MX10.23.0
CPU I/O group denition error
for default tasks
ON when an input unit is dened for an output unit. Fatal fault
%MX10.23.1
CPU I/O group denition error
for level 0 tasks
%MX10.23.2
CPU I/O group denition error
for level 1 tasks
%MX10.23.3
CPU I/O group denition error
for level 2 tasks
%MX10.23.4
CPU I/O group denition error
for level 3 tasks
%MX10.23.5
|
%MX10.23.15
Not used
%MX10.24.0 Not used
%MX10.24.1
Expansion unit running
denition error
ON when the running denition of the expansion unit contains an
error.
Fatal fault
%MX10.24.2
|
%MX10.24.15
Not used
%MX10.27.0
Communication unit/board
running denition error
ON when the running denition of the communication unit/board
contains an error.
Fatal fault
%MX10.27.1
|
%MX10.27.15
Not used
(11) System denition error factor %MW10.22 to %MW10.27 (Read only)