EasyManua.ls Logo

Fuji Electric SPH Series - Announce Relay %MW10.42, %MW10.43 (Read Only)

Fuji Electric SPH Series
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-18
Section 1 Specications
Address Name Description
%MX10.42.0 Initial ag
ON at the rst startup after program download and at initial startup (cold start).
This bit is not set to OFF during operation.
%MX10.42.1 Power-off ag ON when a power-off condition occurred in the preceding session.
%MX10.42.2
|
%MX10.42.15
Not used
%MX10.43.0 Level 0 start ag ON during the rst execution of level 0 task.
%MX10.43.1 Level 1 start ag ON during the rst execution of level 1 task.
%MX10.43.2 Level 2 start ag ON during the rst execution of level 2 task.
%MX10.43.3 Level 3 start ag ON during the rst execution of level 3 task.
%MX10.43.4 Level 4 start ag ON during the rst execution of level 4 task.
%MX10.43.5 Level 10 start ag ON during the rst execution of level 10 task.
%MX10.43.6 Level 11 start ag ON during the rst execution of level 11 task.
%MX10.43.7 Level 12 start ag ON during the rst execution of level 12 task.
%MX10.43.8 Level 13 start ag ON during the rst execution of level 13 task.
%MX10.43.9 Level 14 start ag ON during the rst execution of level 14 task.
%MX10.43.10 Level 15 start ag ON during the rst execution of level 15 task.
%MX10.43.11 Level 16 start ag ON during the rst execution of level 16 task.
%MX10.43.12 Level 17 start ag ON during the rst execution of level 17 task.
%MX10.43.13 Level 18 start ag ON during the rst execution of level 18 task.
%MX10.43.14 Level 19 start ag ON during the rst execution of level 19 task.
%MX10.43.15 Default task start ag ON during the rst execution of the default task.
(13) Announce relay %MW10.42, %MW10.43 (Read only)
%MX10.41.4 Level 4 task slow-down
ON when program execution is deferred and the predened
xed cycle time is not Maintained.
These bits can be set OFF by an application program.
Nonfatal fault
%MX10.41.5 Level 10 task slow-down
%MX10.41.6 Level 11 task slow-down
%MX10.41.7 Level 12 task slow-down
%MX10.41.8 Level 13 task slow-down
%MX10.41.9 Level 14 task slow-down
%MX10.41.10 Level 15 task slow-down
%MX10.41.11 Level 16 task slow-down
%MX10.41.12 Level 17 task slow-down
%MX10.41.13 Level 18 task slow-down
%MX10.41.14 Level 19 task slow-down
%MX10.41.15 Not used

Table of Contents

Related product manuals