Fuji Electric SPH Series - Page 41

1-32
Section 1 Specications
Address Name Description Attribute
%MW1.61811
Parity error counter
(PORT 1)
Counted up when a parity error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
R/W
%MW1.61812
Framing error counter
(PORT 1)
Counted up when a framing error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61813
Overrun counter
(PORT 1)
Counted up when an overrun occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61814
Receive buffer overow
counter (PORT 1)
Counted up when a receive buffer overow occurs during data reception.
Reset to 1 and restarted when the maximum value (FFFF) is exceed.
%MW1.61815
|
%MW1.61818
Not used
%MW1.61819
Parity error counter
(PORT 2)
Counted up when a parity error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
R/W
%MW1.61820
Framing error counter
(PORT 2)
Counted up when a framing error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61821
Overrun counter
(PORT 2)
Counted up when an overrun occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61822
Receive buffer overow
counter (PORT 2)
Counted up when a receive buffer overow occurs during data reception.
Reset to 1 and restarted when the maximum value (FFFF) is exceed.
%MW1.61823
|
%MW1.61826
Not used
%MW1.61827
Parity error counter
(PORT 3)
Counted up when a parity error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
R/W
%MW1.61828
Framing error counter
(PORT 3)
Counted up when a framing error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61829
Overrun counter
(PORT 3)
Counted up when an overrun occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61830
Receive buffer overow
counter (PORT 3)
Counted up when a receive buffer overow occurs during data reception.
Reset to 1 and restarted when the maximum value (FFFF) is exceed.
%MW1.61831
|
%MW1.61834
Not used
%MW1.61835
Parity error counter
(PORT 4)
Counted up when a parity error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
R/W
%MW1.61836
Framing error counter
(PORT 4)
Counted up when a framing error occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61837
Overrun counter
(PORT 4)
Counted up when an overrun occurs during data reception.
Reset to 0 and restarted when the maximum value (FFFF) is exceed.
%MW1.61838
Receive buffer overow
counter (PORT 4)
Counted up when a receive buffer overow occurs during data reception.
Reset to 1 and restarted when the maximum value (FFFF) is exceed.