Fuji Electric SPH Series - Page 45

1-36
Section 1 Specications
2) Special register non-retain area (for expansion left side unit)
Address Name Description Attribute
%MW1.62432 MAC address (L)
Indicates the MAC address of the self station. R%MW1.62433 MAC address (M)
%MW1.62434 MAC address (H)
%MW1.62435 Not used
%MW1.62436 IP address (L)
Indicates the IP address of the self station. R
%MW1.62437 IP address (H)
%MW1.62438 Subnet mask (L)
Indicates the subnet mask. R
%MW1.62439 Subnet mask (H)
%MW1.62440 Default gateway address (L)
Indicates the IP address of the default gateway. R
%MW1.62441 Default gateway address (H)
%MW1.62442
TCP sending and receiving
timeout value
Indicates the TCP sending timeout value. R
%MW1.62443 Not used
%MW1.62444
Loader command watch timer
value
Indicates the timer to monitor access from the target station in the
loader command (server operation) mode.
R
%MW1.62445 Not used
%MW1.62446 Sending retry number of times
Indicates the number of sending retries in TCP communication.
(Fixed to 8)
R
%MW1.62447
Close process during TCP
sending timeout
Not supported
%MW1.62448
Close process during
response receiving timeout
Not supported
%MW1.62449 Not used
%MW1.62450 Not used
%MW1.62451 Response watch timer value Not supported
%MW1.62452
Loader command receiving
port
Indicates the port No. of the self station in the loader communication
(server operation) mode.
In the loader communication (client operation) mode,
the port No. of the self station = “Loader command receive port” +
“Internal socket No.” + 1.
R
%MW1.62453
Loader commend destination
port
Indicates the port No. of the target station in the loader
communication (client operation) mode.
R
%MW1.62454
Communication parameter
status
Indicates the communication parameter with which the CPU
currently operates.
R
%MW1.62455 Not used
%MW1.62456 Left side unit version code Indicates the version code of the expansion left side unit. R
%MW1.62457
|
%MW1.62463
Not used