Fuji Electric SPH Series - Section 1 Specifications

Section 1 Specications
1-1 Performance Specications ...................................................................1-1
1-2 Function Specications .......................................................................... 1-3
1-3 Memory .....................................................................................................1-4
1-3-1 Memory map ..................................................................................................1-4
(1) Main unit with 14/24 points ............................................................................1-4
(2) Main unit with 32/40/60 points .......................................................................1-5
1-3-2 Input/output memory area ..............................................................................1-6
1-3-3 Standard memory area ................................................................................... 1-7
1-3-4 Retain memory area .......................................................................................1-8
1-3-5 User FB instance memory area ...................................................................... 1-9
1-3-6 System FB instance memory area ...............................................................1-10
1-3-7 System memory area ...................................................................................1-11
(1) System memory ...........................................................................................1-11
(2) Resource operating status %MW10.0 (Read only) .................................... 1-12
(3) Resource switch / User ROM state %MW10.1 (Read only) ......................1-12
(4) Resource fatal fault factor %MW10.2 (Read only) ..................................... 1-13
(5) Resource nonfatal fault factor %MW10.4 (Read only) ...............................1-13
(6) CPU error factor %MW10.6 (Read only) ...................................................1-13
(7) Memory error factor %MW10.8, %MW10.9 (Read only) ...........................1-14
(8) Application error factor %MW10.12, %MW10.13 (Read only) ................... 1-14
(9) User fatal fault %MW10.14 to %MW10.16 ................................................1-15
(10) User nonfatal fault %MW10.18 to %MW10.20 ........................................1-15
(11) System denition error factor %MW10.22 to %MW10.27
(Read only) ................................................................................................1-16
(12) Application program error factor %MW10.38 to %MW10.41 ...................1-17
(13) Announce relay %MW10.42, %MW10.43 (Read only) ............................ 1-18
(14) Resource running information %MW10.49 (Read only) ..........................1-19
(15) Resource conguration/fault information %MW10.50, %MW10.51
(Read only) ................................................................................................1-19
(16) Conguration/conguration fault information %WM10.52 to %WM10.83
(Read only) ................................................................................................1-20
(17) User ROM status %MW10.298 (Read only) ............................................ 1-21
(18) SPF original announce relay %MW10.299 (Read only) ..........................1-21
1-3-8 SPF original special relay/register area ........................................................ 1-22
(1) Built-in calendar data %MW1.61442 to %MW1.61449 .............................. 1-22
(2) Battery information %MW1.61450 .............................................................1-22
(3) Pulse catch input %MW1.61472 to %MW1.61479 ....................................1-22
(4) Memories related to interrupt %MW1.61480 to %MW1.61498 ..................1-23
(5) Memories related to high-speed counter
%WM1.61536 to %WM1.61561, %WM3.61536 to %WM3.61577 .............1-25
(6) Memories related to pulse/positioning
%MW1.61600 to %MW1.61769, %MW3.61600 to %MW3.61613 ..............1-27