Fuji Xerox ApeosPort-IV C5570 Administrator's Guide

Machine Information
105
Machine Status
4
4 Set each item.
Note • The items displayed vary depending on
the printer language.
Retrieve Programming
You can retrieve and use settings registered in memory.
1 Select [Retrieve Programming].
2 Select the memory number to use.
Factory Defaults
You can use the factory default settings.
Custom Settings
Displays the numbers stored in the memory.
Programming
You can check or change the value set for the print mode item number.
For the item numbers that can be configured in each mode menu, refer to "ESC/P-K Emulation Settings"
(P.581), "PDF Direct Print Settings" (P.594), "PCL Emulation Settings" (P.598), and "HP-GL/2
Emulation Settings" (P.606).
1 Select [Programming].
2 Enter the item number of the feature to set in
[Item Number] with the numeric keypad.
3 Select [Confirm].
4 Select [Change Value].
5 Enter [New Value] with the numeric keypad.
6 Select [Save].
Item number
Enter the item number of the feature to set.
Current Value
Displays the currently set value for the feature specified in [Item Number].

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)