Fuji Xerox ApeosPort-IV C5570 Administrator's Guide

ESC/P-K Emulation
581
Appendix
15
ESC/P-K Emulation Print Features
Multiple-Up
The Multiple-Up feature reduces the size of multiple-sheet documents and prints them
on a single sheet of paper.
The Multiple-Up feature can be used in the ESC/P-K emulation mode. In the ESC/P-K
mode, 2 Up can be used.
Form Overlay
In the ESC/P-K mode, you can register an original form on the machine, and overprint
the form on a printout.
The form to be used for overlaying can be specified on the control panel.
For more information on registering forms, contact our Customer Support Center.
Barcodes
In the ESC/P-K mode, you can use barcodes. The barcodes that can be used are as
follows:
z
EAN-13
z
EAN-8
z
Interleaved 2 of 5
z
UPC-A
z
UPC-E
z
CODE39
z
CODE128
z
POSTNET
Forms
You can use ESC/P-K to register forms on the machine. Up to 64 forms can be
registered.
For more information on registering forms, contact our Customer Support Center.
ESC/P-K Emulation Settings
The following tables show the basic and extended settings that can be configured on
the ESC/P-K emulation mode menu.
Basic Settings
Setting Item
Item
Number
Value
Output color 5 Sets the output color.
[0] (Default) : Color
[1] : Monochrome

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)