EasyManuals Logo

Fuji Xerox ApeosPort-IV C5570 Administrator's Guide

Fuji Xerox ApeosPort-IV C5570
673 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #311 background imageLoading...
Page #311 background image
Installation Procedures
309
E-mail Environment Settings
8
5 Select [Close].
Note • Rebooting the machine may be required depending on the settings. When a message
displayed on the screen, follow the message and reboot the machine.
6 Print a configuration report to confirm that the ports are enabled and that TCP/IP is set
up correctly.
For information on how to print a configuration report, refer to "Print Reports" (P.95).
Step 2 Configuring E-mail Environment
The following describes the configuration procedures to use the E-mail features.
You can configure the settings using CentreWare Internet Services. For the items that can be configured
using CentreWare Internet Services, refer to "CentreWare Internet Services Setting Items" (P.311).
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.276).
1 Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3) Select [Tools] on the [Services Home] screen.
2 Set up the e-mail address of the machine.
1) Select [Connectivity & Network Setup].
2) Select [Machine's E-mail Address/Host Name], and then configure items.
For information on how to set an e-mail address, refer to "Machine's E-mail Address/Host Name"
(P.181).
3) Select [Close] repeatedly until the [Tools] screen is displayed.
3 Set up the protocol to receive e-mails.
1) Select [Connectivity & Network Setup].
2) Select [Other Settings].
3) Select [Protocol to Receive E-mail], and then select [Change Settings].
4) Select either [SMTP] or [POP3] as appropriate for your environment.
5) Select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
4 Configure the server settings for receiving e-mails.
1) Select [Connectivity & Network Setup].
2) Select [Outgoing/Incoming E-mail Settings].

Table of Contents

Other manuals for Fuji Xerox ApeosPort-IV C5570

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-IV C5570 and is the answer not in the manual?

Fuji Xerox ApeosPort-IV C5570 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax
Duplex PrintingYes
Fax Transmission Speed33.6 kbps
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed55 ppm (color and monochrome)
Monthly Duty Cycle300, 000 pages
ConnectivityEthernet, USB
Paper SizeA3, A4, A5, B4, B5
Memory2 GB
Hard Disk Drive160 GB
Copy Speed55 cpm (black/white and color)

Related product manuals