Fuji Xerox ApeosPort-IV C5570 Administrator's Guide

1 Before Using the Machine
20
Before Using the Machine
1
11 Press the power switch to the [ | ] position to switch on the power.
12 Restart the computer.
For more information on setting items, refer to "Printer Environment Settings" (P.281).
Using the Parallel Interface
This section describes the installation procedures for the parallel interface (optional).
1 Press the power switch to the [ ] position to switch off the power.
2 Make sure that the touch screen is blank and the <Energy Saver> button does not
light up.
3 Open the front cover.
4 Press the main power switch to the [ ] position to switch off the main power.
5 Remove the rear right cover.
6 Insert the connector of the cable into the
machine's parallel interface connector and
fasten it with the clips on either side of the
connector.
7 Return the rear right cover to its original
position.
8 Connect the other end of the cable to the
computer.
9 Press the main power switch to the [ | ] position to switch on the main power.
10 Close the front cover.
11 Press the power switch to the [ | ] position to switch on the power.
12 Restart the computer.
For more information on setting items, refer to "Printer Environment Settings" (P.281).

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)