Fuji Xerox ApeosPort-IV C5570 Administrator's Guide

9 Scanner Environment Settings
320
Scanner Environment Settings
9
5 Select [Close].
Note • Rebooting the machine may be required depending on the settings. When a message
displayed on the screen, follow the message and reboot the machine.
6 Print a configuration report to confirm that the SMB port or FTP client is enabled and
that TCP/IP is set up correctly.
For information on how to print a configuration report, refer to "Print Reports" (P.95).
Step 3 Configuration on the Computer
Create a destination folder on your computer.
z
Using FTP
Create a destination folder on the server where you login and set write rights on the
folder.
z
Using SMB
Create a shared folder on your computer and set the write rights on the shared folder.
Note • To use SMB on Mac OS X, set [Windows Sharing] to [On] in the [Service] tab of [Sharing]
under [System Preferences].

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)