Fuji Xerox ApeosPort-IV C5570 Administrator's Guide

Stapler Faults
547
Problem Solving
14
Staple Jams in Staple Cartridge (For Finisher-A1)
This section describes how to clear staple jam occurred in the staple cartridge of the
Finisher-A1 (optional).
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Take the staple cartridge out of the machine.
Note • The staple cartridge is firmly inserted. A
slight force is required to pull the cartridge
out of the finisher.
3 After you take out the staple cartridge, check
inside of the finisher for any remaining
staples.
4 Pull up the metal part of the staple cartridge
as shown in the illustration.
5 Remove the jammed staples (1), and then
return the metal part pulled up in step 4 to
the original position (2).
CAUTION
Be careful in removing jammed staples.

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)