Scan Service Settings
203
Tools
5
Important • When [Device Color Space] is selected as default and [Color Space] (P.206) is set to
[Disabled], [Auto Detect] of [Color Scanning] in the First Tab does not appear. In addition,
when the High Compression Image Kit (optional) is installed to the machine, [MRC High
Compression] and [Specific Color] under [File Format] is not displayed either.
Original Orientation
Set the default value for [Original Orientation] in the [Layout Adjustment] screen.
Resolution
Set the default value for [Resolution] in the [Layout Adjustment] screen.
You can select from [200 dpi], [300 dpi], [400 dpi], or [600 dpi].
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Layout Adjustment] screen.
Edge Erase
Set the default value for [Edge Erase] in the [Layout Adjustment] screen. You can select from
[All Edges] or [Parallel Edges].
Edge Erase - Top & Bottom Edges
Set the default value for [Top & Bottom] in [Edge Erase] in the [Layout Adjustment] screen.
Specify a value from 0 to 50 mm in 1 mm increments.
Edge Erase - Left & Right Edges
Set the default value for [Left & Right] in [Edge Erase] in the [Layout Adjustment] screen.
Specify a value from 0 to 50 mm in 1 mm increments.
Center Erase/Binding Edge Erase
Set the default value for [Center] in [Edge Erase] in the [Layout Adjustment] screen. Specify a
value from 0 to 50 mm in 1 mm increments.
Quality/File Size
Set the default value for [Quality/File Size] in the [Filling Options] screen.
Select from [Quality: Normal/File Size: Small], [Quality: Higher +1/File Size: Larger +1],
[Quality: Higher +2/File Size: Larger +2], [Quality: Higher +3/File Size: Larger +3], or [Quality:
Maximum/File Size: Largest].
E-mail Subject
Set the default value for the e-mail subject. Up to 128 characters can be entered for the
subject.
Store & Send Link - E-mail Subject
Set the default value for the subject used for the Store & Send Link feature. Up to 128
characters can be entered for the subject.
For more information on the Store & Send Link feature, refer to "5 Scan" > "Scanning Procedure" >
"Step 2 Selecting the Features" in the User Guide.
E-mail Encryption
Set the default value for [Encryption] in the [E-mail Options] in the [E-mail] screen.
Note • This feature appears only when the root certificate for a remote server for remote
authentication (except for Authentication Agent) is set.
To Next Page
Loading...
Need help?
General
