Fuji Xerox ApeosPort-IV C5570 Administrator's Guide

14 Problem Solving
418
Problem Solving
14
The output color
differs between
Secure Print and
Print Stored File.
This is because the print
path is different. The output
color of Print Stored File is
reproduced by the presence
or absence of dots, as with
copying or faxing. On the
other hand, the output color
of Secure Print is
reproduced using density by
default, as with printing.
To closer match the color of Secure Print
and files in folder, select [On] in [Image
Options] > [Print Page Mode] on the
[Advanced] tab of the print driver settings.
The print color
differs from
before.
The color calibration is
incorrect.
Execute auto calibration.
Refer to "Executing Calibration" (P.85).
Symptom Cause Remedy

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)