HP-GL2 Emulation
607
Appendix
15
Paper size 102 Sets the default paper size. Only available when [Paper tray] is set to
[Auto] or [Tray 5]. Only cut sheet can be set.
[3] : A3
[4] (Default*) : A4
[5] : A5
[14] : B4
[15] : B5
[99] : Auto
[101] (Default*) : A Size
Important • When Trays 1 to 4, Tray 6 is selected, [Paper size] cannot be set.
The paper size loaded in the specified tray is displayed.
Note • If [A Size] or [Auto] is selected, the settings become as follows:
• When [Document size] is set to other than [Auto], [Paper size] is set
to [A3].
• When Trays 1 to 4, Tray 6 is selected, the paper size is determined
by the size of paper loaded in the tray, and thus [Paper size] cannot
be set.
• Depending on the combination of [Document size] and [Paper size],
[?] may be displayed for the magnification. In this case, the
document is printed at a scale of 100%.
Paper tray 103 Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF B1)
Important • When Trays 1 to 4, Tray 6 is selected, the paper size is determined
by the size of paper loaded in the tray, and thus [Paper size] cannot
be set.
Note • When [Auto] is selected and paper of the same size in the same
orientation in multiple trays is loaded, paper will be fed in the order of
Tray 1 J Tray 2 J Tray 3J Tray 4 J Tray 6. If paper of the same
size is loaded in multiple trays but in different orientations, feeding of
the paper loaded in the landscape orientation is prioritized.
Coordinate
rotation
104 Sets the paper orientation for printing.
[0] (Default) : 0 degree
[1] : 90 degree
Color mode 105 Sets the color mode.
[0] : Color
[1] (Default) : Grayscale
[2] : Black pen
Parameter Item No. Value
To Next Page
Loading...
Need help?
General
