Output Format
157
Copy
3
* : The staple orientation displayed on the touch screen may differ from the actual staple orientation. Outputs are stapled in
the orientation shown in the above table.
Paper Size and Punching Position (Finisher-B1, C3 Finisher, C3 Finisher with Booklet Maker)
z
2 holes*
1
*1 : The distance between the two holes is 70 mm with the US 2/3 Hole Punch Kit, and is 80 mm with the 2/4 Hole Punch
Kit, which is ordinary used.
*2 : Only available for C3 Finisher and C3 Finisher with Booklet Maker.
z
3 holes
z
4 holes
A4, 8 x 10",
8.5 x 11",
8.5 x 13",
8.5 x 14"
A4, B4,
11 x 17", 8K
1 Staple 1 Top Right 2 Staples 2 Top 2 Right
2 Holes 2 Holes Top
2 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A4, A3, B4, 8 x 10"*
2
, 8.5 x 11", 8.5 x 13",
11 x 15", 8.5 x 14", 11 x 17", 8K
3 Holes 3 Holes Top
3 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
4 Holes 4 Holes Top
4 Holes
Right
A4 , 7.25 x 10.5" , 8.5 x 11" , 16K
A3, 11 x 15", 11 x 17", 8K
To Next Page
Loading...
Need help?
General
