3 Copy
156
Copy
3
z
Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder. Always select [Sideways Images] when the top of
the document is placed facing the left side (horizontal text).
îš„ Z Fold Half Sheet
If the Folder Unit CD1 (optional) is installed, the output can be Z-folded.
Z fold can be applied to B4, A3, 11 x 17". If you have mixed sized documents, the width
(vertical direction) of the paper must be the same, such as a combination of A4 (portrait)
and A3 (landscape), and a combination of B5 (portrait) and B4 (landscape). When you have
the combinations, the Z fold is only applied to the larger papers (A3(landscape) and B4
(landscape)).
îš„ Output/Offset
Allows you to select the output destination tray and offset operation.
z
Offset Stacking
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Paper Size and Stapling Position
z
Finisher-B1
* : The staple orientation displayed on the touch screen may differ from the actual staple orientation. Outputs are stapled in
the orientation shown in the above table.
z
C3 Finisher / C3 Finisher with Booklet Maker
1 Staple 1 Top Right 2 Staples 2 Top 2 Right
A4 , B5 ,
7.25 x 10.5" ,
8 x 10" ,
8.5 x 11" ,
16K
A4, A3, B4,
8.5 x 11",
8.5 x 13",
8.5 x 14",
11 x 15",
11 x 17", 8K
1 Staple 1 Top Right 2 Staples 2 Top 2 Right
A4 , B5 ,
8 x 10" ,
8.5 x 11" ,
16K
To Next Page
Loading...
Need help?
General
