Safety Notes
27
Before Using the Machine
1
1 Press the power switch to switch the power
off.
-When the Finisher-B1 (optional) is installed
2 Make sure that the touch screen is blank and the <Energy Saver> button is not lit.
3 Open the front cover.
4 Press the main power switch to the [ ]
position to switch the main power off.
Keep electrical and mechanical safety interlocks active. Keep the safety
interlocks away from magnetic materials. Magnetic materials may
accidentally activate the product and cause injuries or electric shock.
A ground fault interrupter is embedded in this product. If current leakage
occurs, the ground fault interrupter automatically cuts off power circuit to
prevent electric shock and a fire accident. The ground fault interrupter is
normally ON. Check once a month if the ground fault interrupter works
properly in accordance with the following procedures:
To Next Page
Loading...
Need help?
General
