Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Replacing Consumables
105
Maintenance
3
2 Stick the supplied pin into the old stamp cartridge, and pull it straight out of the machine.
Note
z
If only the sponge part of the stamp cartridge is removed, make sure of removing the bottom part of the
cartridge.
3 Insert the new stamp cartridge.
4 Close the Side 2 scanner, and then close the document feeder gently.
Replacing Stamp (for Duplex Automatic Document Feeder C1-PC)
If the machine offers the Fax service and the Stamp Kit SP-H (optional) is installed, replace
the stamp cartridge when stamp impressions start to fade.
Important
z
Do not touch the ink pad of the stamp cartridge as the ink may be adhered to the pad. If it comes into
contact with your skin, wash immediately.
z
Problems caused by using consumables not recommended by Fuji Xerox are not covered by the maintenance
service contract.
z
Before using consumables, carefully read instructions and precautions on their packages.
Note
z
We recommend always keeping spare consumables/periodic replacement parts in stock.
z
To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)