Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Warmer Mode
29
Before Using the Machine
1
Warmer Mode
Depending on the operating environment, temperature rise in the machine may cause
condensation when the machine exits the Sleep mode. You can use the Warmer mode to
prevent or reduce condensation.
We recommend that you enable this mode when the season changes.
Note
z
For some models, [Warmer Mode] may not be displayed depending on the setting by our service
representative. For more information, contact our Customer Support Center.
z
During operation of the Warmer mode, the machine does not enter the Sleep mode.
Setting the Warmer Mode
1 Press the <Log In/Out> button.
2 Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and
enter the system administrator’s passcode, and select [Enter].
Note
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
Note
z
When the Services Home screen is not displayed on the touch screen, press the <Services Home> button.
4 Select [System Settings] > [Common Service Settings] > [Machine Clock/Timers].

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)